#Profibus_DP
GSD_Revision = 1
Vendor_Name = "Stoegra"
Model_Name = "SERS"
Revision = "070601"
Ident_Number = 0x07B9
Protocol_Ident = 0  ; 0 = Profibus-DP
Station_Type = 0  ; 0 = DP-Slave
FMS_supp = 0  ; single DP-Mode, no FMS
Hardware_Release = "040001"
Software_Release = "070201"
;
9.6_supp   = 1
19.2_supp  = 1
93.75_supp = 1
187.5_supp = 1
500_supp   = 1
1.5M_supp  = 1
3M_supp    = 1
6M_supp    = 1
12M_supp   = 1
;
MaxTsdr_9.6   = 60  ; max. Systemreactiontime in BitTimes
MaxTsdr_19.2  = 60
MaxTsdr_93.75 = 60
MaxTsdr_187.5 = 60
MaxTsdr_500   = 100
MaxTsdr_1.5M  = 150
MaxTsdr_3M    = 250
MaxTsdr_6M    = 450
MaxTsdr_12M   = 800
;
Redundancy = 0
Repeater_Ctrl_Sig = 2  ; TTL-Level for CNTR-P Pin
24V_Pins = 0  ; M24V und P24V an der Profibus Buchse nicht angeschlossen
Implementation_Type ="SPC3"  ; ASIC-Type
;
Freeze_Mode_supp = 1
Sync_Mode_supp = 1
Auto_Baud_supp = 1
Set_Slave_Add_supp = 0
Max_Diag_Data_Len = 16
Slave_Family = 0
Min_Slave_Intervall = 1  ; * 100us, Mindestzeit zwischen Abfragen
Module = "SERP Anweisungen 32 Byte I/O" 0xC0, 0x1F, 0x1F
EndModule
Module = "SERP Anweisungen 16 Byte I/O" 0xC0, 0x0F, 0x0F
EndModule
Module = "SERP binaer 8/12 Byte I/O" 0xC0, 0x07, 0x0B ; 8 Byte out, 12 Byte in
EndModule
Module = "SERP binaer 8/12 Byte I/O konsis" 0xC0, 0x87, 0x8B ; 8 Byte out, 12 Byte in
EndModule
Module = "SERP binaer 22/12 Byte I/O" 0xC0, 0x95, 0x8B ; 22 Byte out, 12 Byte in
EndModule